Making Use Of Primary Colors In A Painting

The three primary colors on the color wheel are red, blue and yellow. The reason why they are called primary colors is because these three colors cannot be created by mixing any colors. Primary colors are the basic colors that are used to make other colors. In a nutshell, you can call these three primary colors as the building blocks for producing other colors.

The best part about these colors is that they produce different colors and no two combinations, when they are mixed, will produce the same results. Many artists prefer cadmium red medium, cadmium yellow light and cobalt blue as the three primary colors in the color wheel.

Aforementioned, either of the three primary colors that is, red, blue and yellow when mixed together can produce different results every single time, and that is the most interesting part about mixing two primary colors. You could also do with the basic magenta, cyan or cobalt but these three would not produce rich outcome in terms of texture when it comes to mixing with a dark color such as black – these subtle differences add a great distinction in the end results.

Many professional artists prefer using cadmium red medium, cadmium yellow light and cobalt blue as the primary colors. However, it is mostly dependent on the perception of the painter, when they choose to paint. Else, if you are looking to buy a painting online or want to order some custom made paintings, you can visit instapainting.

The Pigments On The Colour Wheel

By now you must have understood that when you mix two primary colors in equal concentration, it creates a secondary color. So when you mix yellow with blue, it will give you the secondary color green. Likewise, if you mix the color red with blue it would create the secondary color purple, or if you mix yellow with red it will give you the color orange. However, what you need to ensure in this is that the concentration of the two primary colors in the mixture has to be balanced out.

When you mix a primary color in equal amount with a shade of secondary color it gives you what you call a ‘tertiary color’. For example, if you mix yellow with orange in equal concentration it will give produce a yellowish-orange. In this mixture, the concentration of yellow will be more, since yellow is the primary color here.

Additional Primary Colour Mixing

Primary colors subtracts the light of the secondary colors. Hence they are called subtractive because they subtract or absorb the light from the spectrum visible. In this case, black is the only color which has no spectrum of light in it.

When you mix the three primary colors – yellow, red, blue – are mixed together it will produce an earthy brown color which absorbs most of the light from the spectrum. When you are mixing one primary color with a secondary color and you want to tone down the darkness of the primary color in it, you could add more quantity of secondary color to the concentration to tone lighten out the mix.

Every time you mix two different primary colors, it will produce a different secondary color. For example, if you mix a cadmium red with cadmium yellow light, it will produce an orange. The amount of yellow and red you use in the concentration, will affect the hue of the secondary color that comes out as a result of the mixture.

Crimson Red is a cool red that is more inclined towards blue, whereas cadmium red medium is a warm red, that is more inclined towards yellow. Similarly, cadmium yellow medium is a warm yellow, whereas lemon yellow is cooler. On these lines, if you mix, say, cadmium yellow with cadmium red you will be mixing two warm colors together to produce a purer orange.

However, if you mix a cooler color such as cadmium yellow medium as compared to a warm color such as crimson red, you will produce a primary blue which will neutralize the effect of the secondary color to a considerable extent.

Understanding the spectrum of colours on the colour wheel and knowing the subtle difference between two shades in intrinsic to an artist. To add to this, understanding how to balance out a concentration of two colours is also important so that you get desirable results in your painting. If you have any queries with regard to this article, please share with us in the comment section below.

Posted On :


Yep! Today we’re making candles, and it’s actually crazy easy. I got really frustrated last season trying to find the perfect fall candle. Everything I got my hands on was almost $20 (I’m looking at you small sized Woodwicks). And even when I found a good price, the fragrance was overpowering or too artificial.

This spring, I’ve decided to go all in with my essential oils starter kit from Young Living. If you haven’t checked out their site yet, it’s a game changer. I’d been following a lot of DIY ideas from The Droppery but this time I wanted to try my own. And what better place to start than with candles?

I love my diffuser, but I don’t have one in every room. This simple DIY is a great way to incorporate oils into everyday life while filling your room with pure, therapeutic scents. I started by ordering my supplies from Bulk Apothecary because I’ve known people to use that company and my own research confirmed it was the best place to start.

I already had Lemon and Lavender handy, but both are included in your Young Living Premium Starter kit, so once yours arrives, your good to go! There are so many scent combinations you can explore, so I’m really excited to make more of these little treasures once my kit arrives.

I read a ton of DIY ideas and all of them sounded really complicated… so I’ve simplified it to make these 4oz candles. I had an old candle in this jar, so I just reused it, but you can buy crates of the 4oz size and 8oz size- just be sure to double the recipe!  It literally took me 5 min.

The first step is to melt your wax flakes (if you have a block, chop into cubes similar to if you were melting butter). It takes twice as many ounces to fill it in liquid form, so for a 4oz candle, shoot for 8oz of wax. Heat for about 1-2 minutes in the microwave using 30-second increments, and stirring between each.

Once it’s all melted, add you’re essential oils! If using a 4oz jar, stick to about 15-17 drops total. I wanted mine fairly light since it’s going to a small bathroom and not scenting a whole room. So I used 7 drops lavender, and 4 drops lemon, using the lemon to balance the lavender more than anything. Of course, you can create whatever combo you like!

Dip the metal end of the wick into the melted wax and press into the bottom of the jar. The tacky wax sort of acts like a glue. Then give your melted wax and oils a good stir and pour directly into your jar, holding the wick steady if you need to. Some ideas recommended using a clothespin to hold the wick in place, but mine stayed pretty steady so I just used a plastic straw to keep it from wanting to learn while the wax set.

Now you wait! 24 hours is a safe bet. I would not put this in the fridge to speed up the process since rapid cooling can cause divots or cracks in your candle wax. After it’s set, trim your wick to about 1in height. Your finished product should look something like this!

While I waited for it to set, I decided to be super crafty and paint the lid with chalkboard paint, lest I forget which oils I put in here! Totally not necessary, but kinda fun.

Tada! So easy, and now I have a brand new, essential oil candle to add some charm to my guest bathroom.


Homemade candles using Young Living essential oils to add natural, pure fragrance. Cook Time- 5 min Total Time- 24 hr 5 min


  1. 8oz Advanced soy wax flakes
  2. 15-17 drops of essential oils (I used 7 drops Lavender, 5 Lemon for a light fragrance)
  3. 1 pre-waxed 3in wick
  4. 1 4oz jelly jar


  1. Heat wax flakes in microwave safe container for 1-2 minutes, stirring every 30 seconds until fully melted
  2. Dip metal end of wick into melted wack and secure to bottom of jelly jar, using straw or paper clip to keep wick upright
  3. Add in desired essential oils to melted wax and stir. Then pour wax into jelly jar, being sure to stabilize the wick if needed
  4. Allow to sit for 24 hours or until wax is set. Do NOT put in the refrigerator as rapid cooling can cause wax to dip or crack
  5. Once the candle is set, cut the wick to about 1 inch and you’re ready to enjoy!


You can also use a wood wick for these candles. Just soak wick in olive oil for an hour, and wipe off excess with paper towel Then secure the wood wick in a wick clip (sold together) and stick it to the bottom with melted wax as usual!

Posted On :


I’ll be the first to admit I’m not that great at DIYs. I’m great at having DIY ideas but when it comes to execution, I usually fall short or leave it up to my husband to do the actual work. Not this time! This project was so easy, it’s hardly a project at all. And it literally took me five minutes. In a fraction of the time it takes to shop for air freshener, you could have made your own and with no harsh chemicals, weird fake smells, or aerosol cans.

How do you ask? Essential oils of course! It’s becoming my answer to everything lately and for good reason. If you haven’t done your reading, check out Young Living’s line of essential oils. They are high quality, therapeutic grade oils that are safe for all types of uses around your home from cleaning counter tops, to hair and scalp treatments. My older sister made her own shampoo and you should SEE the difference in her hair. I won’t get carried away on that because I’m saving that for another day (guest post, perhaps…)

I think we can all agree there are these “spots” in our house that just don’t get a lot of attention, whether it be a room we hardly enter or a back corner of the house that just doesn’t get proper airflow. Our guest bedroom is all of the above, and over time it just gets kinda musty no matter how much I dust or sweep in there. It finally hit me the other day, the linens, while clean, sit on a made bed for weeks and just don’t get any air. I wash them, put them on the bed and rewash them a month later, but during that time they just start to smell. It’s not a bad smell but it’s definitely not the “fresh linen” scent they came out of the dryer with. So what’s a girl to do? Wash bedsheets once a week even though no one is sleeping on them? Who’s got time for that?

Enter this essential oil linen freshener. It takes less than 5 minutes to make and stores well beneath any bathroom sink or linen closet until you need it next. I spritzed my guest bedroom linens,  my master bedroom linens, the hand towels in the bathrooms, and my couch pillows. This stuff smells SO good! And you can change up the scent however you like. I used a combination of YL Lavender and Lemon to add some freshness. You could also add YL’s Purification or Rosemary to the mix. Lavender, Lemon, and Rosemary are a pretty versatile and popular mix because of the earthy fresh scent it adds to the home.

For those worried about the alcohol in it, don’t worry. The alcohol does not stain or leech color off any fabrics, and it evaporates super quickly. If you just had oil and water in your spray bottle, the oils wouldn’t emulsify in the water as well and you would get an uneven distribution coming up through the spray spout. If it bothers you, or you don’t have vodka in the house, use high-quality pure vanilla extract (spoiler alert, it’s also made with alcohol but it adds depth to the scent).



  1. 3/4 cup filtered water
  2. 2 Tbs vodka (or pure vanilla extract)
  3. 14 drops of essential oils, any combo (I used 7 Lemon and 7 Lavender)
  4. 8-16oz glass spray bottle for storing


Combine first three ingredients in the glass spray bottle and shake shake shake. That’s it! You’re ready to add a spritz to your home and freshen up those corners.

Posted On :